Filter
Top Products
10
2.3 BIKE SETTINGS (BIKE)
The cycling computer can be programmed for two separate bike preferences. Select bike 1 or bike 2 when you start
recording.
View or change the following bike settings in the Settings menu.
Select Settings -> Bike -> BIKE 1 or BIKE 2:
1. AUTOSTART: ON / OFF
The AutoStart function starts or stops exercise recording automatically when you start or stop cycling.
You have to install the Polar Speed Sensor to use the AutoStart function. For further information, see chapter 2.2 Install Speed Sensor.
2. CADENCE: ON / OFF
Cadence is the speed at which you turn the cranks of your bicycle measured in revolutions per minute (rpm).
Install an optional Polar Cadence Sensor on your bicycle to access the cadence features of your cycling computer.
3. DISTANCE: Target dist ON / OFF (Estimated Time of Arrival)
Set the distance you are going to ride, and the cycling computer will calculate and display the estimated time of arrival based on cycling
speed. Install the Polar Speed Sensor on your bike to measure speed and distance. For further information, see chapter 2.2 Install Speed
Sensor.