Filter
Top Products
16
Determining Your OwnZone Heart Rate Limits
Find your OwnZone limits in 1-5 minutes during a warm up period by cycling or walking/jogging. You should start exercising gently at a light
intensity and gradually increase intensity to raise heart rate.
Before you start, make sure that,
• Your user settings are correct.
• The OwnZone function is activated. The cycling computer will automatically determine OwnZone every time you start exercising if the
OwnZone function is on.
1. Start recording exercise. The OwnZone symbol
appears on the display. To skip OwnZone determination and use the limits from your
previous session, press OK.
2. OwnZone determination begins. The process happens in fi ve stages. A beep will signal the end of each stage (if the sound settings are on),
and the display will automatically light up (if you have switched the backlight on once before). Avoid stopping during OwnZone
determination.
1. Cycle or walk at a slow pace for 1 min. Keep your heart rate below 100 bpm/ 50 % HR
max
during this fi rst stage.
2. Cycle or walk at a normal pace for 1 min. Slowly increase your heart rate by approximately 10 bpm/ 5 % HR
max
.
3. Cycle or walk at a brisk pace for 1 min. Increase your heart rate by approximately 10 bpm/ 5 % HR
max
.
4. Cycle at a brisk pace or jog at a slow pace for 1 min. Increase your heart rate by approximately 10 bpm/ 5 % HR
max
.
5. Cycle or jog at a brisk pace or run for 1 min. Increase your heart rate by approximately 10 bpm/ 5 % HR
max
.