Filter
Top Products
Frame Assembly Instructions
Use th~s procedure to assemble the frame of the ParaBady 950ST
~ .~t/8" X 4’
NUT
X 3" I~rtLT ~
Step
A.
I
Loosely assembler the leg we|~ht base (18) and the press weight stack base (1~, to 1’he base
(15) using two 1/2 x 5-1/2 bolts (91), four 1/2" washers(79), and two 1/2’ nyl¢)ck nuts
shown. Apply two non-sk~d strips (61~ to the base as shown.
Loo~ly assemble the fro.nf upright ~31) to ~he base (15) using two 1/2 3- 1/2: bolts ~9 1), fo ur
1/2’ washers (79~, and ~wo 1/2" nylock nuJs ~82) as shown.
Loosely assemble the rear ~prigh~ ~o the base 05) using one
woshers (79), and one 1/Z nylock nut (82) os shown.
emblie the Sop boom.(,~0) to the front uprigh~ (31) using one 1/2 x :~ bali (8’7),
~o~ely a~s__ {~ nnd one 1/2 nylock nut (82), and to the rear upright (21) using two 1/2
1/z WaSher= ~-=/, ---
-
1/2" low heigh~ nylock nut (84) as =~hown. Tighten
bolts (88), three 1/2" washe~ (79), and
all frame conm~c~1ons. 5