Filter
Top Products
11
FIGURE 11
STEP 11
STEP 12
• Slide the PRESS ARM ADJUST (7) over the bearings in the TOP BOOM (5) as shown in FIGURE 11. (NOTE: Steps 12 & 13 may
require two people to assemble.)
FIGURE 12
5
7
5
62
• Insert two 3/4" FLANGE BEARINGS (62) into bushings on the TOP BOOM (5) as shown in FIGURE 11.
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2