Filter
Top Products
33
Regular maintenance is necessary for optimal performance and long life of the treadmill. Please read and
f
ollow all instructions below. If the treadmill is not maintained as described, components may wear ex-
cessively, the treadmill may be damaged, and the warranty will be voided. If you have questions about main-
tenance, see HOW TO CONTACT CUSTOMER CARE on page 2 of this manual. CAUTION: Make sure to re-
move the key and unplug the power cord before performing any maintenance procedures.
WEEKLY MAINTENANCE
1. Unplug the power cord. Inspect and properly tighten all external parts of the treadmill.
2. Apply a mild multi-purpose cleaner to a 100% cotton cloth and remove any dust and grime from the handrails,
uprights, foot rails, frame, and motor hood. In addition, wipe the walking platform along the sides of the walk-
ing belt. Do not wipe under the walking belt. Apply a small amount of mild multi-purpose cleaner to a 100%
cotton cloth and wipe the console and the screens. Do not spray cleaner directly onto the treadmill or use
ammonia or acid-based cleaners.
3. Make sure that the walking belt is centered and properly tightened. If it is centered and runs smoothly, do not
make any adjustments. If the walking belt needs to be adjusted, see pages 37 and 38.
MONTHLY MAINTENANCE
1. Unplug the power cord. Remove the Hood Support Bolts
(37) attaching the Motor Hood (91), and lift off the Motor
Hood.
2. Using a hand-held vacuum, clean the area under the Motor
Hood (not shown). Be careful to avoid touching any com-
ponents. Check the motor belt for wear and cracks. If the motor
belt needs to be replaced, see HOW TO CONTACT CUS-
TOMER CARE on page 2.
3. Plug in the power cord and insert the key into the console. Press the START button. Be careful to avoid in-
jury; keep your hands away from moving parts and make sure that your clothes cannot become
caught in moving parts. While the walking belt is moving, check the treadmill for unusual noises or odors. If
any of these problems exists, see HOW TO CONTACT CUSTOMER CARE on page 2. Remove the key and
unplug the power cord. Reattach the Motor Hood (91) with the Hood Support Bolts (37).
1
37
91
37
Motor
Belt
2
PREVENTIVE MAINTENANCE