Filter
Top Products
12
HOW TO CONNECT THE POWER CORD IN THE
UNITED STATES
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock.
This product is for use on a dedicated, 20-amp,
120-volt circuit. No other appliance should be on
the same circuit. This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug.
Plug the grounding plug into a standard NEMA 5-20
receptacle. Do not modify the plug or the receptacle.
Do not use an adapter, a surge protector, or an exten-
sion cord. The receptacle must be grounded.
HOW TO CONNECT THE POWER CORD IN THE UK
This product must be earthed. If it should malfunc-
tion or break down, earthing provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock.
This product is for use on a dedicated, 10-amp,
240-volt circuit. No other appliance should be on
t
he same circuit. The product is equipped with a cord
having an equipment-earthing conductor and an earth-
ing plug.
Plug the earthing plug
into a receptacle as
shown at the right. Do
not modify the plug or
the receptacle. Do not
use an adapter or an ex-
tension cord. The recep-
tacle must be earthed.
HOW TO CONNECT A CATV CABLE
If your treadmill has the Workout TV console, a
CATV cable must be connected to the treadmill for
cable TV stations to be viewed.
Locate the cable
jack on the front of
the treadmill.
Connect the CATV
cable to the cable
jack (in the UK use
a PAL adapter [not
included]). Route
the cable so that it
will not be pinched
or crushed by the lift mechanism or the frame.
A satellite receiver, VCR, or DVD player can also be
connected to the treadmill. Connect a CATV cable
from the coaxial output on your equipment (usually la-
beled TV OUT or RF OUT) to the cable jack on the
front of the treadmill.
Note: Audio/video equipment without coaxial outputs
(some satellite receivers and DVD players) will require
an RF modulator to work correctly with the treadmill.
RF modulators are not available from FreeMotion
Fitness, but are available at electronics stores. See the
owner's manual for the equipment you wish to connect
to determine if an RF modulator is needed, or contact
your local audio/visual service provider.
DANGER: Improper connection
of the equipment-grounding conductor can
r
esult in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician. Do not use
an adapter to connect the plug to an improper
receptacle.
HOW TO CONNECT THE TREADMILL
NEMA 5-20
Receptacle
Cable Jack