Filter
Top Products
11
Before moving the treadmill, unplug the power
c
ord. Note: It may be necessary to disconnect a CATV
cable and a network wire from the treadmill, depending
o
n how far the treadmill will be moved.
Due to the size and weight of the treadmill, moving
it requires two or three persons. Hold the metal
frame firmly in the location shown at the right.
CAUTION: To decrease the possibility of damage to
the treadmill or of injury, do not lift the frame by the
plastic front cover. Carefully roll the treadmill on the
wheels to the desired location and then lower it back to
the level position. CAUTION: To reduce the risk of in-
jury, use extreme caution while moving the tread-
mill. Do not attempt to move the treadmill over un-
even surfaces.
Frame
Front
Cover
Wheels
HOW TO MOVE THE TREADMILL
Note: If the included power cord is
not long enough, see HOW TO
CONTACT CUSTOMER CARE on
page 2 of this manual and order a
3.6 m (12-foot) power cord.