Filter
Top Products
HOW TO USE THE MAINTENANCE MODE
The console features a maintenance mode that allows
you to access information and to view and change var-
ious default settings. Follow the steps below to use the
maintenance mode.
Insert the key into the console.
Refer to GETTING STARTED on page 14.
Hold down the ENTER AGE/WT button and the
RESET button simultaneously for two seconds
to select the maintenance mode.
When the maintenance mode is selected, the
words MAINTENANCE MODE will appear in the
main display.
Press the ENTER AGE/WT button to view the
total number of hours that the treadmill has
been used.
Press the ENTER AGE/WT button again to
view the total distance that the walking belt
has moved.
Press the ENTER AGE/WT button again and
set the delay time for the timeout mode.
Any time that the treadmill is not used for several
minutes, the console will enter a timeout mode
and the words PUSH ANY BUTTON TO START A
NEW PROGRAM will begin to scroll across the
main display. To set the number of minutes before
the console will enter the timeout mode, press the
+ and – buttons above the ENTER AGE/WT but-
ton. The delay time can be from 1 to 15 minutes.
If you have the Basic console or the Workout
TV console, go to step 6. If you have the
iFIT.com console, go to step 8.
Press the ENTER AGE/WT button again and
set the program time for the CARDIO WALK 1,
ENDURANCE 1, and FINISH LINE 1 programs.
The CARDIO WALK 1, ENDURANCE 1, and FIN-
ISH LINE 1 programs can be set to last for 20, 30,
or 40 minutes. To change the setting, press the +
and – buttons above the ENTER AGE/WT button.
Press the ENTER AGE/WT button again and set
the program time for the CARDIO WALK 2, EN-
DURANCE 2, and FINISH LINE 2 programs.
The CARDIO WALK 2, ENDURANCE 2, and FIN-
ISH LINE 2 programs can be set to last for 20, 30,
or 40 minutes. To change the setting, press the +
and – buttons above the ENTER AGE/WT button.
Press the ENTER AGE/WT button again to
check for controller errors.
If there are no controller errors, the words NO
CONTROLLER ERRORS will appear in the main
display. If there is a controller error, the name of
the error will appear in the main display. If this oc-
curs, press the RESET button. If the same con-
troller error appears repeatedly, call Customer
Care toll-free at 1-800-201-2109.
8
7
6
5
4
3
2
1
23