Filter
Top Products
_'STEP 3 - Seat Carriage Assembly
a) Remove (1) Alien Bolt and (1) Washer from underside of Carriage Tube, see Figure 3,
b) Position Seat Carriage in front of Carriage Tube with the (1) bolt hole facing down.
c) Raise Locking Arm, slide Carriage Tube into Seat Carriage and push Locking Arm
down to hold Carriage Tube In place.
d) Remove (3) Alien Bolts and (3] Washers from Main Frame.
e) Plug Pulse Wire from Main Frame Info Long Extension Pulse Wire from Carriage Tube
and remove twist fie, see Figure 3.
f) Slide Carriage Tube over Main Frame, align bolt holes and fasten using (3) Allen Bolts
and (3) Washers removed in Step 3d, tighten bolts, Note; DO NOT Pinch Wires.
g) Attach Carriage Tube to Support Tube with [1) Allen Bolt and [1) Washer removed in
Step 3a and tighten,
h) Tighten the Rear Foot Tube bolts, installed in Step 2c,wtth Multi Hex Tool provided.
M8 x 15ram
allen
bolts seat
longextenslon._. carriage
pulse wire _ ..... I
cordage
/ tube
/
_Tame
i
support
tube
\
\
M8x 15rnm
allen bolt
Flgure 3 - Instafl Seat Carriage