Filter
Top Products
:_,STEP6 - Computer Tube Assembly
a) Remove (4) Allen Bolts and (4] Washers from
Main Frame.
b) Connect Main Frame wires to wires in
Computer Tube (remove twist ties] and
carefully tuck wires into Main Frame while
sliding Computer Tube onto Main Frame, see
Figure 6,
Be careful not to pinch the wires. Genlly pull
the wires up from the top of lhe Computer
Tube to prevent any slack in the wires at the
base of the Computer Tube.
c) Re-install the [4) Allen Bolts and (4) Washers
that were removed in Step 6a and tighten
with Multi Hex Tool.
computer
tube
hondebor
tube wires(4)
M8x 15rnm
M8x ]5ram
allen bait M8 allen barfs
\ washer
w#es(4]
Figure 6 - Install Computer Tube
_;TEP 7 - Foot Pedal Assembly
The Foot Pedals, Pedal Shafts and Pedal Straps are
marked "R" for Right or "L"for Left,
a) insert Pedal Shaft of Left Foot Pedal into threaded
hole in Left Crank, see Figure 7.
b) Turn Pedal Shaft by hand counterclockwise until
snug. Note: DO NOT turn the Pedal Shaft
clockwise, doing so will strip the threads. Tighten
shaft with Mufti Hex Tool provided.
e) Insert Pedal Shaft at Right Foot Pedal Into threaded
hole in Right Crank,
d) Turn Pedal Shaft by hand clockwise until snug.
Tighten with Mufti Hex Tool provided,
pedal
left left
sffap crank
Figure 7 - Install Foot Pedals