Filter
Top Products
27
STEP 33:
FIGURE 33
• SECURE the ball end of the PRESS CABLE (44) and two 4-1/2” PULLEYS (48) to the SWIVEL PULLEY BRACKET (35) using two 3/8
X 2” BOLTS (89), four 3/8” WASHERS (80), and two 3/8” LOCK NUTS (82) as shown in FIGURE 33. (NOTE: Loop the cable around
the pulleys prior to inserting it into the SWIVEL PULLEY BRACKET.)
• Route the threaded end of the PRESS CABLE (44) through the large hole in the PRESS FRAME (37) as shown in FIGURE 33.
89 3/8 X 2”
48
80
82
35
37
44
44 PRESS CABLE