Filter
Top Products
STEP 13:
FIGURE 13
15
• SECURELY assemble one 2 X 8” PLATE (17) to the LEG SEAT
PAD (102) using two 3/8 X 1-1/4” BOLTS (88) and two 3/8”
WASHERS (80). See FIGURE 13.
STEP 14:
• SECURELY assemble the LEG SEAT PAD (102) to the HINGE TABS (76) using two 3/8 X 1-1/4” BOLTS (88) and two 3/8” WASHERS
(80). See FIGURE 14.
FIGURE 14
80
17
102
88 3/8 X 1-1/4”
54
• Apply one 1-1/4” RUBBER BUMPER (54) to the 2 X 8” PLATE
(17) as shown in FIGURE 13.
• SECURELY assemble one 1/2 X 7-7/8” SPRING PIN (66) to the LEG FRAME (34) as shown in FIGURE 14.
88 3/8 X 1-1/4”
76
34
66
102
80