Filter
Top Products
STEP 2 (See Diagram 2)
A.) Insert two Guide Rods (#12) into the holes on the Guide Rod Base (#10). Secure each
Guide Rod with one M10 x ¾” Allen Bolt (#80) and Ø ¾” Washer (#94) from the bottom.
B.) Attach the Guide Rod Base to the Left and Right Base Frames (#1 & #14). Secure each
side with one M10 x 2 1/8” Allen Bolt (#83) and Ø ¾” Washer (#94).
DIAGRAM 2
8