Filter
Top Products
STEP 16 (See Diagram 16)
A.) Connect the Lat Bar (#5) to the 180” Upper Cable (#40) with two C-clips (#75) and a Short
Chain (#74). Store the Lat Bar onto the hooks on the Right Upper Frame.
B.) Connect the Abdominal Strap (#99) to the Cable Head Connector (#45) with a C-clip. Secure
the C-clip to the Connector with one M10 x 1 1/8” Allen Bolt (#92) and M10 Aircraft Nut (#97).
C.) Insert two Foam Tubes (#30) halfway through the holes on the Right Seat Support (#2) and
Leg Developer (#7). Push four Foam Rolls (#48) onto the Tubes form both sides. Plug four
Foam Roll End Caps (#62) into the ends.
D.) Connect the Arm Curl Handle (#8) to the 105” Lower Cable (#41) with a Long Chain (#73) and
two C-clips.
DIAGRAM 16
27