Filter
Top Products
STEP 6 (See Diagram 6)
A.) Attach the Left Seat Support (#15) to the Left Base Frame (#14). Secure it with one M10 x
2 ½”Carriage Bolts (#87), Ø ¾” Washer (#94), and M10 Aircraft Nut (#97).
B.) Attach the Left Seat Support to the Left Vertical Beam (#17). Secure it with two M10 x 2 ½”
Carriage Bolts (#87), one 4 3/8” x 1 ¾” Bracket (#32), two Ø ¾” Washers (#94), and two
M10 Aircraft Nuts (#97).
C.) Attach the Leg Press Frame (#16) to the bracket on the Left Base Frame (#14). Secure it
with one M12 x 3” Allen Bolt (#79), two Ø 1” Washers (#95), and one M12 Aircraft Nut
(#98).
D.) Attach two Leg Press Diagonal Supports (#31) to the Leg Press Frame from both sides.
Secure them with two M10 x 2 ½” Carriage Bolts (#87), Ø ¾” Washers (#94), and M10
Aircraft Nuts (#97). Make sure the Leg Press Frame is able to swivel on its pivot.
E.) Securely tighten all Nuts and Bolts previously installed.
DIAGRAM 6
14