Filter
Top Products
STEP 5 (See Diagram 5)
A.) Attach the Right Seat Support (#2) onto the Right Base Frame (#1). Secure it with
one M10 x 2 ½” Carriage Bolt (#87), Ø ¾” Washer (#94), and M10 Aircraft Nut
(#97).
B.) Attach the Right Seat Support (#2) to the Right Vertical Beam (#3). Secure it with
two M10 x 2 ½” Carriage Bolts (#87), one 4 3/8” x 1 ¾” Bracket (#32), two Ø ¾”
Washers (#94), and two M10 Aircraft Nuts (#97).
C.) Attach the Leg Developer (#7) to the bracket on the Right Seat Support (#2).
Secure it with a 2” Axle (#51), two M10 x ¾” Allen Bolts (#80), and two Ø ¾”
Washers (#94).
DIAGRAM 5
13