Filter
Top Products
Intermittent Symptoms
Symptom or Error FRUs of the SelectaDock
Sequence of Actions
An intermittent problem
occurs.
The problem can be difficult
to analyze because it
occurs intermittently. If your
docking station has such a
problem, verify that:
1. The computer is firmly
attached to the docking
station.
2. All cables and power
cords are securely
connected to the
SelectaDock system
and to the attached
options.
3. The SCSI device is
correctly terminated.
4. Do the loop test. (See
“How to Run the
Diagnostics” on
page 11.)
If these items are correct
and the problem still occurs,
go to “Undetermined
Problems” on page 30.
Other Symptoms
Symptom or Error FRUs of the SelectaDock
Sequence of Actions
Computer does not work,
the power-on indicator does
not turn on, but the fan
runs.
1. See “Undetermined
Problems” on
page 30.
Program-load error during
remote IPL from the file
server.
1. Network Adapter
The HDD-3 or HDD-4 is not
recognized and no error
codes appear on the
screen. (The password of
the HDD-3 or HDD-4 is still
set.)
Note: The HDD-3 or
HDD-4 icon
indicates the
2.5-inch ThinkPad
hard disk drive
installed in the
SelectaDock.
1. Remove the hard
disk password for the
ThinkPad hard disk
as follows:
a. Remove the hard
disk drive from
the SelectaDock
Docking System
and install it to the
computer.
b. Remove the hard
disk password.
29