Filter
Top Products
Testing the Expansion Unit
1. The Test Selection Menu appears when you select
Test Expansion Unit on the Main Menu.
2. Select an item on the screen and follow the
instructions that appear on the screen.
Testing the SCSI Subsystem
Note
If a SCSI adapter is installed in an PCI adapter card
slot, remove it before running the SCSI diagnostic
program.
1. When you select Test SCSI Subsystem on the Main
Menu, the diagnostics program checks the system
configuration for SCSI devices and displays the
following if no SCSI controller is found.
If a SCSI controller is found, the computer goes on to
initialize the SCSI devices and displays the following:
SCSI Subsystem Diagnostics Utility V2.1
Enter F3=Exit
Scanning Target #n
14 IBM Mobile Systems HMM