Filter
Top Products
15
24. Wrap the High Cable (73) over a 90mm Pulley
(58) and over the indicated rod in the Top Frame
(16). Attach the Pulley to the Top Frame with an
M10 x 42mm Button Bolt (96) and an M10 Nylon
Locknut (79).
26. Attach the High Cable (73) inside of the Weight
Carriage (41) with an M10 x 67mm Button Bolt
(90), two M10 Washers (84), two 24mm Spacers
(45), and an M10 Nylon Locknut (79).
Attach the lower Carriage Bushing (42) inside the
W
eight Carriage (41) with an M10 x 67mm Button
Bolt (90), two M10 Washers (84), a 51mm Spacer
(44), and an M10 Nylon Locknut (79).
25. Wrap the High Cable (73) over a 90mm Pulley
(58). Attach the Pulley to the Top Frame (16) with
an M10 x 42mm Button Bolt (96) and an M10
Nylon Locknut (79).
90
84
45
73
26
79
84
41
45
42
44
84
79
25
79
96
16
58
73
23. Wrap the High Cable (73) under a 90mm Pulley
(58). Attach the Pulley, a Small Cable Trap (63),
a
nd two Half Finger Guards (40) to the two Pulley
Plates (74) with an M10 x 53mm Button Bolt
(
147) and an M10 Nylon Locknut (79). M
ake sure
that the Small Cable Trap is oriented to hold
the Cable in the groove of the Pulley.
23
147
4
0
4
0
79
74
74
58
63
73
79
96
16
24
73
58
Rod