20
ASSEMBLY GUIDE
ASSEMBLY PROCESS
Step 6: Installing Rear Base Covers
Locate the following for this step:
Parts:
• Assembly from Step 5
• Rear Base Plastic Cover (Qty. 1)
• Rear Step Cover (Qty. 1)
Hardware:
• #8 Self Tapping Phillips Head Screw (Qty. 13)
Tools:
• Phillips Screw Driver
6-1 Attach the Rear Base Plastic Cover to the rear of
the base assembly using 5 of the #8 Self Tapping
Phillips Head Screws.
6-2 Attach the Rear Step Cover to the base assembly
using 8 of the #8 Self Tapping Phillips Head
Screws.
Figure 6: Installing Rear Base Cover
& Rear Step Cover
Rear Step Cover
Rear Base Plastic Cover
Phillips Head Screw
Phillips Head Screw
Base Assembly