Filter
Top Products
10
Folding & Moving Your Bowflex
®
Ultimate
™
Home Gym
Folding and moving your Bowflex
®
Ultimate
™
home gym is easy.
Follow the simple steps below to fold your Bowflex
®
Ultimate
™
home gym. Once it’s folded, simply tilt the machine back on its
transport wheels and roll it to any location
1. Remove the leg attachment from the
Bowflex
®
Ultimate
™
home
gym, if attached.
2. Lock the seat and bench into place using the spring
lock seat pin.
3. Hook cables into cable storage loops.
4. Bind the Power Rods
®
with the rod binding strap.
5. Remove the threaded knob on the platform.
6. Tilt the bench up to the Power Rods
®
.
7. Screw the threaded knob into the end of the sliding seat rail.
Maintenance & Care of Your Bowflex
®
Ultimate
™
Home Gym
Inspect your machine for any worn or loose components prior to
use. Tighten or replace any worn or loose components prior to use.
Pay close attention to cables, or belts and their connections.
Clean the bench with a non-abrasive household cleanser after
each use. This will keep it looking new. Do not use automotive
cleaner, which can make the bench too “slick.”
Review all warning notices. The safety and integrity designed into
a machine can only be maintained when the equipment is regularly
examined for damage and repaired. It is the sole responsibility of
the owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced
immediately or the equipment removed from service until
the repair is made. Only manufacturer supplied
components shall be used to maintain/repair the
equipment.
If you have any questions regarding your
Bowflex
®
Ultimate
™
home gym, please
call our Customer Service Department at
1-800-605-3369 or by mail at: 1400
N.E. 136th Ave., Vancouver, WA 98684.
Using Your Machine
1 2
3 4
5 6
7