Chapter 7 Wireless LAN
P-2812HNU-51c User’s Guide
170
7.10 The Advanced Setup Screen
To configure advanced wireless settings, click Network > Wireless LAN >
Advanced Setup. The screen appears as shown.
Figure 74 Wireless LAN > Advanced Setup
The following table describes the labels in this screen.
Table 47 Wireless LAN > Advanced Setup
LABEL DESCRIPTION
RTS/CTS
Threshold
Enter a value between 0 and 2432.
Fragmentation
Threshold
This is the maximum data fragment size that can be sent. Enter a value
between 256 and 2432.
Number of
Wireless
Stations
Allowed
Specify the maximum number (from 1 to 64) of the wireless stations that
may connect to the P-2812HNU-51c.
Output Power Set the output power of the P-2812HNU-51c. If there is a high density of
APs in an area, decrease the output power to reduce interference with
other APs. Select one of the following 20%, 40%, 60%, 80% or
100%.
Multicast Rate Select a data rate at which the P-2812HNU-51c transmits wireless
multicast traffic.
If you select a high rate, multicast traffic may occupy all the bandwidth
and cause network congestion.
