Chapter 48 Interface Commands
ES-4124 User’s Guide
406
An example is shown next.
• Enable ports 1, 3, 4 and 5 for configuration.
• Set the BPDU control to
tunnel, to forward BPDUs received on ports one, three, four
and five.
48.2.4 broadcast-limit
Syntax:
broadcast-limit
broadcast-limit <pkt/s>
where
An example is shown next.
• Enable port one for configuration.
• Enable broadcast control.
• Set how many broadband packets the interface receives per second.
48.2.5 bandwidth-limit
The bandwidth-limit command enables bandwidth control on the Switch.
Syntax:
bandwidth-limit
bandwidth-limit pir <Kbps>
bandwidth-limit cir <Kbps>
bandwidth-limit egress <Kbps>
where
An example is shown next.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# bpdu-control tunnel
sysname(config-interface)#
broadcast-
limit
= Enables broadcast storm control limit on the Switch.
<pkt/s>
= Limits how many broadcast packet the interface receives per second.
sysname(config)# interface port-channel 1
sysname(config-interface)# broadcast-limit
sysname(config-interface)# broadcast-limit 21
pir <Kbps>
= Sets the maximum bandwidth allowed for incoming traffic.
cir <Kbps>
= Sets the guaranteed bandwidth allowed for incoming traffic.
egress <Kbps>
= Sets the maximum bandwidth allowed for outgoing traffic
(egress) on the Switch.
