Chapter 45 Introducing Commands
ES-4124 User’s Guide
379
gvrp Disable GVRP on the port(s). 13
igmp-filtering
profile
Disables IGMP filtering. 13
igmp-group-limit Disables IGMP group limitation. 13
igmp-immediate-
leave
Disables the IGMP immidiate
leave function.
13
ipmc egress-
untag-vlan <vlan-
id>
Disables the port(s) removing
VLAN tags from outgoing
multicast frames when
forwarding.
13
inactive Enables the port(s) on the
Switch.
13
ingress-check Disables ingress checking on the
port(s).
13
intrusion-lock Disables intrusion-lock on a port
so that a port can be connected
again after you disconnected the
cable.
13
loopguard Disables the loop guard feature
on the port(s).
13
mac-
authentication
Disables MAC authentication via
a RADIUS server on the port(s).
13
mirror Disables port mirroring on the
port(s).
13
multicast-limit Disables multicast limit on the
port(s).
13
protocol-based-
vlan ethernet-
type <ethernet-
type>
Disables protocol based VLAN of
the specified protocol on the port.
13
trtcm Disables 2-rate 3-color marking
on the port(s).
13
vlan-trunking Disables VLAN trunking on the
port(s).
13
protocol-based-
vlan name <name>
ethernet-type
<ethernet-type>
vlan <vid>
priority <0-7>
Creates a protocol based VLAN
with the specified parameters.
13
inactive Disables the protocol based
VLAN.
13
pvid <1-4094> The default PVID is VLAN 1 for
all ports. Sets a PVID in the
range 1 to 4094 for the specified
interface.
13
qos priority <0 .. 7> Sets the quality of service priority
for an interface.
13
Table 142 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE
