Chapter 48 Interface Commands
ES-4124 User’s Guide
405
• Perform a remote loopback test from port 7.
48.2.3 bpdu-control
Syntax:
bpdu-control <peer|tunnel|discard|network>
where
sysname# show ethernet oam discovery 7
Port 7
Local client
------------
OAM configurations:
Mode : Active
Unidirectional : Not supported
Remote loopback : Supported
Link events : Not supported
Variable retrieval: Not supported
Max. OAMPDU size : 1518
Operational status:
Link status : Up
Info. revision : 10
Parser state : Forward
Discovery state : Send Any
Remote client
-------------
MAC address: 00:a0:c5:dd:e8:f4
Vendor(oui): 0x00 0xa0 0xc5
OAM configurations:
Mode : Active
Unidirectional : Not supported
Remote loopback : Supported
Link events : Not supported
Variable retrieval: Not supported
Max. OAMPDU size : 1518
Operational status:
Info. revision : 6
sysname# ethernet oam remote-loopback test 7
Port 7: Transmitting packets ...
OAM Remote Loopback Test: 1000 transmitted, 1000 received correctly
<peer|tunnel|discard|
network>
=Type peer to process any BPDUs received on these ports.
Type
tunnel to forward BPDUs received on these ports.
Type
discard to drop any BPDUs received on these ports.
Type
network to process a BPDU with no VLAN tag and
forward a tagged BPDU.
