Chapter 45 Introducing Commands
ES-4124 User’s Guide
382
45.12.6 config-vlan Commands
The following table lists the vlan commands in configuration mode.
no ip dvmrp Disables DVMRP in this routing
domain.
13
ip igmp Disables IP IGMP in this routing
domain.
13
ip ospf
authentication-key
Disables OSPF authentication
key settings in this routing
domain.
13
ip ospf
authentication-sama
Sets the routing domain not to
use the same OSPF
authentication settings as the
area.
13
ip ospf cost Disables the OSPF cost in the
routing domain.
13
ip ospf message-
digest-key
Sets the routing domain not to
use a security key in OSPF.
13
ip ospf priority Resets the OSPF priority for the
interface.
13
ip vrrp
authentication-key
Resets the VRRP authentication
settings.
13
Table 143 interface route-domain Commands (continued)
COMMAND DESCRIPTION
PRIVILEG
E
Table 144 Command Summary: config-vlan Commands
COMMAND DESCRIPTION
PRIVILEG
E
vlan <1-
4094>
Creates a new VLAN group. 13
exit Leaves the VLAN configuration
mode.
13
fixed <port-list> Specifies the port(s) to be a
permanent member of this VLAN
group.
13
forbidden <port-
list>
Specifies the port(s) you want to
prohibit from joining this VLAN
group.
13
help Displays a list of available VLAN
commands.
13
inactive Disables the specified VLAN. 13
ip address <ip-address> <mask> Sets the IP address of the
Switch in the VLAN.
13
<ip-address> <mask>
manageable
Sets the IP address of the
Switch in the VLAN and allow
remote management to this IP
address.
13
default gateway <ip-
address>
Sets the default gateway IP
address in this VLAN.
13
