Chapter 45 Introducing Commands
ES-4124 User’s Guide
373
ssh known-hosts <host-
ip> <1024|ssh-
rsa|ssh-dsa> <key>
Adds a remote host to which the
Switch can access using SSH
service.
13
storm-
control
Enables broadcast storm control
on the Switch.
13
subnet-
based-vlan
Enables subnet based VLAN on
the Switch.
13
dhcp-vlan-override Sets the Switch to force the
DHCP clients to obtain their IP
addresses through the DHCP
VLAN.
13
name <name>
source-ip <ip>
mask-bits <mask-
bits> vlan <vid>
priority <0-7>
Specifies the name, IP address,
subnet mask, VLAN ID of the
subnet based VLAN you want to
configure along with the priority
you want to assign to the
outgoing frames for this VLAN.
13
inactive Disables the subnet based
VLAN.
13
syslog Enables syslog logging. 13
server <ip-
address>
inactive Disables syslog logging to the
specified syslog server.
13
level [0 ~ 7] Sets the IP address of the
syslog server and the severity
level.
13
type <type>
facility [local 1
..7]
Sets the log type and the file
location on the syslog server.
13
tacacs-
accounting
host <index><ip> Specifies the IP address of
TACACS+ accounting server 1
or TACACS+ accounting server
2 (index = 1 or index = 2).
13
[acct-port
<socket-
number>] [key
<key-string>]
Sets the port number and key of
the external TACACS+
accounting server.
13
timeout <1-1000> Specifies the TACACS+
accounting server timeout value.
13
tacacs-
server
host <index> <ip> Specifies the IP address of
TACACS+ server 1 or
TACACS+ server 2 (index = 1 or
index = 2).
13
[auth-port
<socket-
number>] [key
<key-string>]
Sets the port number and key of
the external TACACS+ server.
13
timeout <1-1000> Specifies the TACACS+ server
timeout value.
13
Table 141 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
