Chapter 45 Introducing Commands
ES-4124 User’s Guide
383
45.13 mvr Commands
The following table lists the mvr commands in configuration mode.
name <name-str> Specifies a name for
identification purposes.
13
no fixed
<port-list>
Sets fixed port(s) to normal port(s).
13
forbidden <port-
list>
Sets forbidden port(s) to normal
port(s).
13
inactive Enables the specified VLAN. 13
ip address <ip-
address> <mask>
Deletes the IP address and
subnet mask from this VLAN.
13
ip address default-
gateway
Deletes the default gateway from
this VLAN.
13
untagged <port-list> Specifies the port(s) you want to
tag all outgoing frames
transmitted with this VLAN
Group ID.
13
normal <port-
list>
Specifies the port(s) to
dynamically join this VLAN group
using GVRP
13
untagged <port-
list>
Specifies the port(s) you don’t
want to tag all outgoing frames
transmitted with this VLAN
Group ID.
13
Table 144 Command Summary: config-vlan Commands (continued)
COMMAND DESCRIPTION
PRIVILEG
E
Table 145 Command Summary: mvr Commands
COMMAND DESCRIPTION PRIVILEGE
mvr <1-
4094>
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
13
8021p-priority
<0-7>
Exist from the MVR
configuration mode.
13
exit Exist from the MVR
configuration mode.
13
group <name-str>
start-address
<ip> end-address
<ip>
Sets the multicast group range
for the MVR.
13
inactive Disables MVR settings. 13
mode <dynamic|
compatible>
Sets the MVR mode (dynamic
or compatible).
13
name <name-str> Sets the MVR name for
identification purposes.
13
no group Disables all MVR group
settings.
13
