A SERVICE OF

logo

Figure 6-81 SNMP screen
The following options are available on the SNMP screen:
Enable SNMP v1 read-write access. Select this option to enable SNMP V1 agents on the printer.
Custom community names can be configured to control management access to the printer.
Set Community name: Type the SNMP Set Community Name (password) to allow SNMP
information to be configured (or written) on the printer.
Confirm Set Community name: Retype the SNMP Set Community Name (password) to allow
SNMP information to be configured (or written) on the printer.
Get Community name: Type the SNMP Get Community Name (password) to allow SNMP
information to be read from the printer.
Confirm Get Community name: Retype the SNMP Get Community Name (password) to allow
SNMP information to be read from the printer.
Disable SNMP v1 default Get Community name of “public”. Select this option to disable the
default Get community name "public". If you select this option, you will need to type values in
the Get Community name and Confirm Get Community name fields.
Enable SNMP v1 read-only access (uses “public” for the Get Community value). Select this
option to enable the SNMP V1 agents on the printer, but limit access to read-only. Write-access is
disabled. The default Get Community name "public" is automatically enabled.
Disable SNMP v1. Select this option to disable the SNMP V1 agents on the printer, which is
recommended for secure environments. If SNMP V1 is disabled, some port monitors or discovery
utilities may not operate properly.
ENWW
Configuration options
281
The HP Toolbox