Name Function
A
Pen Tip
• Turn on the interactive pen. When turned on, it takes
approximately one second before the interactive pen is
operational.
• Hold the pen close to the projected image, and press to
use.
s "Using the Interactive Features (EB-536Wi only)"
p.58
s "Optional Accessories" p.172
B
Battery light
Press the button on the side of the pen to indicate the
remaining battery power.
• When the battery is charged, the light is lit green until
you release the button.
• When the battery is running low, the light flashes green
until you release the button.
• Does not light when the battery is exhausted. Change
the batteries.
s "Replacing the Battery for the Interactive Pen" p.20
C
Button
Turn on the interactive pen. When turned on, it takes
approximately one second before the interactive pen is
operational.
Name Function
D
Attachment for
optional strap or cord
Allows you to attach a commercially available strap.
E
Battery cover
Open this cover when replacing the battery.
s "Replacing the Battery for the Interactive Pen" p.20
a
The interactive pen turns off automatically after 20 minutes of
inactivity.
To use the pen again, tap the pen tip or press the button on the side
to turn on the power.
Replacing the Battery for the Interactive Pen
When you press the button, the battery light on the interactive pen lights or
flashes. Does not light or flash when the battery is exhausted. When the
light no longer lights or flashes, replace the battery. Use one of the
following types of battery. Other chargeable batteries cannot be used.
• AA size manganese battery
• AA size alkaline manganese battery
• eneloop
®
*
(HR-3UTG/HR-3UTGA/HR-3UTGB/BK-3MCC)
*eneloop
®
is a registered trademark of the Panasonic Group.
Attention
Make sure you read the following manual before handling the batteries.
s Safety Instructions
Part Names and Functions
20
