3-81
Printing with EPSON Drivers for Windows | 81
Choose Auto Expand or Retain Size from the pull-down menu:
• Auto Expand enlarges your image (up to 3%) to fit the size of the
paper.
• Retain Size prints your image at the size you specify in your
application. You need to size it slightly wider than the paper width if
you want to print without borders.
4. Choose one of the following
Auto Cut settings:
•Off disables automatic cutting. Choose this setting if you want to
operate the cutter manually, print multiple print jobs without
cutting, or if you are printing on heavy media that must be cut with
scissors. See page 38 for instructions on operating the cutter
manually.
• Single Cut causes the images to be printed end-to-end and saves
paper. With borderless printing, you may see a sliver of the previous
or next image.
•Normal Cut allows margin space at the top and bottom of each
image.
• Double Cut extends the space between images and trims each print
individually. This provides the cleanest edge for borderless printing.
5. Select the size of your image as the paper size.
To make the best use of your paper, creating a custom paper size is
recommended. Select
User Defined. You see this screen:
Type a name for your custom size, then enter the size in hundredths of
an inch (or centimeters) and click
Save, then click OK.
Tip: Creating a
user-defined paper
size generally lets you
make the best use of
your roll paper.
sp4000Guide.book Page 81 Friday, October 22, 2004 5:06 PM
