2-62
62 | Printing with EPSON Drivers for Macintosh
Recommended Settings for Borderless Printing
For true borderless printing on roll paper, you can select either Auto
Expand
or Retain Size and create a custom paper size. Your image may be
clipped on the left and right edges, but you can minimize clipping by sizing
your image according to the page width.
The Auto Expand setting provides the best solution for borderless printing
with minimal image clipping. Using this setting, you can create a custom
paper width equal to the width of the roll media. If you use the Retain Size
setting, you should create a custom paper width slightly wider that the actual
width of the media.
The following table shows recommended image widths (in inches) for
borderless printing using either the Auto Expand or Retain Size setting:
* Non-EPSON roll media widths
Recommended image widths (in inches) for borderless printing
Roll paper
width
Image width
(with Auto Expand)
Image width
(with Retain Size)
Custom Paper Size
(for Retain Size only
8* 7.7675 8.3 8.2
8.3 8.06 8.35 8.3
10 9.7075 10.3 10.2
12* 11.695 12.3 12.2
14* 13.695 14.3 14.2
16 15.6 16.3 16.2
17 16.6 17.3 17.2
sp4000Guide.book Page 62 Friday, October 22, 2004 5:06 PM
