Fine-tuning the Projector 35
■
Tint
(video only)
Adjusts the green-to-magenta balance.
■
Video Signal
(video only)
Leave this setting at
Auto
unless you are using a 60-Hz PAL
system (select
PAL60
).
■
Aspect Ratio
(video only)
Set to
4:3
for letterbox video content and to
16:9
for
widescreen video content.
■
Brightness
Lightens or darkens the overall image.
■
Contrast
Adjusts the difference between light and dark areas.
■
Sharpness
Sharpens or softens the image.
■
Color Mode
Corrects the vividness of image color. You can select from
these settings, and save a different one for each source:
sRGB:
Setting for computer displays with analog video
Normal:
For bright rooms
Meeting:
For projecting without color enhancement
Presentation:
For dark rooms
Theater:
For optimizing movie images with natural color
(default for video or S-Video)
Game:
For optimizing video games.
■
Input Signal
Leave on
RGB
when a computer is connected to the
Computer/Component Video
port. When a component
video source is connected, choose
YCbCr
or
YPbPr
,
depending on the type of signals produced by your source.
(You can tell which setting is correct by the quality of the
projected image.)
4. When the image is set correctly, press
ESC
or
Menu
. Your
settings are automatically saved.
52c.book Page 35 Wednesday, October 9, 2002 2:32 PM
