Setting Up the Projector 11
If you place the projector below the level of the screen, you’ll have to
tilt it up by extending the feet as shown. Tilting the projector upward
causes the image to lose its rectangular shape, but you can correct the
distortion with the keystone feature (see page 27).
If you place the projector level with the bottom of the screen, the
image will be rectangular and you won’t have to adjust it. If you place
the projector higher than the bottom of the screen, the image will still
be rectangular, but you won’t be able to fill the whole screen with the
image.
note
fter positioning the
rojector, you may want to
connect a Kensington
icroSaver anti-theft device
to the lock port on the
rojector’s left side. You can
urchase this from EPSON;
see page 7
.
52c.book Page 11 Wednesday, October 9, 2002 2:32 PM
