6 Welcome
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■
To receive an S-Video signal, you need an S-Video cable. (One is
usually provided with your video device.)
■
To receive a component video signal from a VCR or other video
device, you need a D-sub 15-pin to component video cable
(available from EPSON; see page 7).
■
To amplify your computer’s audio through the projector’s sound
system, you need a computer audio cable (male-to-male 3.5-mm
stereo miniplug cable). See your computer or electronics dealer to
obtain this cable.
■
Some older PowerBooks and Macintosh desktop models may
need the Macintosh adapter set shown on page 71 (available from
EPSON; see page 7). Older iMac systems may need a special
adapter to provide a VGA output port; see your computer dealer.
■
For a PowerBook or Macintosh desktop with a DVI output port,
you’ll need to use a DVI to VGA adapter that may have come
with your computer. See your Macintosh documentation for
instructions.
52c.book Page 6 Wednesday, October 9, 2002 2:32 PM
