A SERVICE OF

logo

Open as PDF
next previous
Using the Projector 25
Adjusting the Image
Once you see your image, you’ll need to make certain adjustments:
■
To focus or resize your image, see below.
■
If the image is too high or too low, you can reposition it.
See page 26.
■
If the image isn’t rectangular, see page 27.
Focusing and Resizing Your Image
Rotate the focus ring to sharpen the image.
You can change the image size by moving the projector closer to or
farther away from the screen. You can also use the
E-Zoom
buttons
on the remote control to zoom in on a portion of the image, as
described on page 29.
Focus ring
52c.book Page 25 Wednesday, October 9, 2002 2:32 PM