20 Using the Projector
Turning On Your Equipment
Make sure your projector and other equipment are set up and
connected correctly, as described in Chapter 1 or Appendix A. Then
turn on your projector, as described below, followed by any
equipment you’ve connected to it.
Turning On the Projector
Follow these steps to plug in and turn on the projector:
1. Connect one end of the power cord to the projector’s power inlet
on the back of the projector.
2. Connect the other end to an electrical outlet.
The power light on top of the projector turns orange, indicating
that the projector is receiving power but not yet turned on.
3. Remove the lens cap.
caution
Do not use the projector with
the lens cap in place. The
heat generated by the lens can
damage the cap.
52c.book Page 20 Wednesday, October 9, 2002 2:32 PM
