level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * -
candidate default,
> - non-active route, + - summary route
Gateway of last resort is not set
Destination
Gateway
Dist/Metric Last Change
-----------
-------
----------- -----------
S 1.1.1.0/24 4.4.4.2, via Te
1/4
1/0 00:00:01
6.6.6.2, via Te 1/16
C 4.4.4.0/24 Direct, Te
1/4
0/0 00:01:32
C 6.6.6.0/24 Direct, Te
1/16
0/0 00:01:25
Dell(conf)#do show ip route 1.1.1.0/24
Routing entry for 1.1.1.0/24
Known via "static", distance 1, metric 0
Last update 00:05:01 ago
Routing Descriptor Blocks:
* 4.4.4.2, via TenGigabitEthernet 1/4
* 6.6.6.2, via TenGigabitEthernet 1/16
Dell(conf)#
show ip route list
Display IP routes in an IP prefix list.
S6000
Syntax
show ip route vrf vrf-name list prefix-list
Parameters
prefix-list Enter the name of a configured prefix list.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to
display IP routes in an IP prefix list corresponding to that VRF.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
IPv4 Routing
809
