trusted-port
Allow bypassing the configured RA guard validation and forwards the RA packets received on the
interface, which has the trusted port policy attached.
Syntax
trusted-port
To reset the policy applied to the trusted port, use the no trusted-port
command.
Defaults none
Command
Modes
POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Usage
Information
Use this command to disable all the RA guard policies.
Related
Commands
• ipv6 nd ra-guard enable — Allows you to configure the RA guard related
commands.
• ipv6 nd raguard policy policy-name — Defines the router advertisement (RA)
guard policy name and enter the RA guard policy configuration mode.
1038
Neighbor Discovery Protocol (NDP)
