Adam Equipment PGL Series Manual

A SERVICE OF

next previous

26 | P a g e © Adam Equipment Company 2011

Basic Input Commands:

!KT<CR>

Tares the balance to display the net weight. This is the same as pressing the [Zero

/ Tare] key when the balance is in the normal weighing mode.

!KP<CR>

Transmits data over RS-232 interface. This is the same as pressing the [Print] key

when the balance is in the normal weighing mode.

Invalid Input Command:

If an invalid command is received, then the command is returned as follows-

Invalid Command Message returned Remarks

!NT<CR> !EU<CR> Command character is not ‘K’

!KK<CR> !EK<CR> Key character is not ‘T’ or ‘P’

!KT-<CR> !EF<CR> Command format error, <CR> is not the

fourth character

KT<CR> or !KT - No reply Either ‘!’ or <CR> is missing in the

command string