16 | P a g e © Adam Equipment Company 2011
weighing unit. If the weighing unit is pounds: ounces the limit is set in decimal
pounds, 1.500 lb = 1 lb 8oz.
4) Press [Enter] to proceed
5) If the “LOW LIMIT” was set to “OFF” or the setting of the low limit is complete,
then the display will change to “HIGH LIMIT”. Use [Up] and [Down] to set the
“HIGH LIMIT” to “On” or “OFF”
6) Press [Enter] to proceed
7) If the “HIGH LIMIT” was set to “On”, the display will show the current high limit
which can be changed by using the numeric entry method (see section 5.1)
8) Press [Enter] to proceed
9) Next the beeper setting is displayed. Press [Up] or [Down] to scroll through the
options –
10) “BUZZER OFF” (Beeper set to off at all times)
11) “BUZZER In” (Beeper will sound when the weight on the pan is within the limit)
or
12) “BUZZER Out” (Beeper will sound when the weight on the pan is outside the set
limits)
13) Confirm the beeper setting by pressing [Enter]
14) Press [Enter] again to start the Check Weighing
15) When a weight is placed on the pan now, the display will indicate whether the
weight is below the LOW LIMIT between the LOW and HIGH LIMITS or higher
than the HIGH LIMIT using the capacity tracker,
16) To perform check weighing with another sample press [Mode] and continue as
before
17) To return to normal weighing, press [Mode] then press [Esc].
