A SERVICE OF

logo

19 | P a g e © Adam Equipment Company 2011
7) The balance will request the weight in air by displaying “AIR WEIGHT”. Place
the glass plumb supplied with the density determination kit in air on the
weighing pan and press [Enter] to start the air weighing
8) On completion of the air weighing, the balance will request the weight in
liquid by displaying “LIQUID WT”. Submerge the glass disk in the liquid and
press the [Enter] key. The balance will compute the density of the liquid and
display it. Remove the item from the pan
9) Press [Mode] to continue with a new sample or press [Mode] then [Esc] to
return to normal weighing