Filter
Top Products
7
1. Make sure that the power cord is unplugged.
Attach the six Base Feet (90) to the bottom of
the Base (91) with six M4.2 x 19mm Tek Screws
(6).
3. Have a second person hold the Base (91) in the
position shown.
Identify the Right Upright (87), which has a large
hole near the lower end. Orient the Right
Upright as shown. Attach the Right Upright to
the Base (91) with two M10 x 58mm Bolts (2).
Do not tighten the Bolts yet.
Attach the Left Upright (86) to the Base (91)
in the same way. Orient the small holes as
shown.
91
6
6
90
9
0
1
6
6
6
90
90
90
2. Attach each Wheel (92) to the Base (91) with an
M10 x 80mm Bolt (4) and an M10 Nut (15).
92
4
2
4
15
15
3
87
Small
Holes
2
92
Large
Hole
91
86
2
91