Filter
Top Products
6
ASSEMBLY
T
o hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
b
elt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver ,
adjustable wrench , and wire cutters .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached
to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-
bly. Extra hardware may be included.
M10 x 110mm Bolt (1)–2
M10 x 80mm Bolt (4)–2
M10 x 58mm Bolt (2)–4
M10 Star
Washer (11)–2
M8 x 52mm Bolt (8)–2
M4.2 x 19mm
Screw (5)–6
M5 x 16mm
Screw (9)–2
M10 Nut
(15)–2
M5 Star
Washer (13)–2
M8 Nut
(16)–2
M8 Washer
(10)–4
M10 Washer
(12)–2
M8 x 16mm
Bolt (3)–6
M4.2 x 19mm
Tek Screw (6)–6
5/16" Star
Washer (14)–6
#10 x 1" Tek Screw
(7)–2