Filter
Top Products
11
10. Attach the Console (94) to the Uprights (86, 87)
with six M8 x 16mm Bolts (3) and six 5/16" Star
Washers (14). Start all six Bolts before tight-
ening any of them.
1
0
14
3
3
3
14
14
14
86
87
11. With the help of a second person, lower the
Uprights (86, 87) as shown.
See the lower drawing. Position the Uprights
(86, 87) so that the Frame (61) is centered be-
tween the Uprights.
Firmly tighten the M10 x 58mm Bolts (2) and the
M10 x 110mm Bolt (1) on each side of the tread-
mill (only one is shown). Do not overtighten
the M10 x 110mm Bolts.
87
86, 87
1
61
61
86
View from Above
Side View
11
2
94
3