16
Each time the key is in-
serted into the console,
the Scan mode will be
s
elected. The SCAN
mode indicator will ap-
p
ear in the display, and
a second mode indicator will show which mode is
currently displayed. Note: If you have selected a
different mode, repeatedly press the Display Mode
button to reselect the scan mode.
To select the Speed,
Time, Distance, or
Calories mode for con-
tinuous display, repeat-
edly press the Display
Mode button. The mode
indicators will show which mode is selected. Make
sure that the SCAN mode indicator does not ap-
pear.
To reset the display, press the Stop button, remove
the key, and then reinsert the key.
The console can display speed and distance in ei-
ther miles or kilometers (MPH or Km/H will appear
when the Speed mode is
displayed). To change
the unit of measurement,
r
emove the key, hold
down the Stop button
w
hile inserting the key
into the console, and then release the Stop button.
An “E” for English miles or an “M” for metric kilome-
ters will appear in the display. Press the Speed in-
crease button to change the unit of measurement.
Then, remove the key and reinsert it.
5. When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, re-
move the key from the console, and put it in a secure
place.
When you are finished using the treadmill, switch
the reset/off circuit breaker to the “off” position and
unplug the power cord. IMPORTANT: If you do
not do this, the treadmillʼs electrical compo-
nents may wear prematurely.