Filter
Top Products
56. Apply the WELDER PRO 9940 decal in the location shown. Important: The warning decals shown below
have been attached to the home gym in the locations shown. If a decal is missing or illegible, please
call our customer hotline at the number on the front cover of this manual to order a replacement
decal. Apply the new decal in the appropriate location.
56
mayresultinserious
injury.
• Readuser'smanual
andfollowallwarnings
andoperatinginstruc-
tionspriortouse.
• Donotallowchildren
onoraroundmachine.
• Replacelabelif
damaged,illegible,or
removed.
57. Make sure that all parts have been properlytightened. The use ofthe remainingparts willbe explained in
ADJUSTMENT, beginningon page 25 of this manual.
Before usingthe home gym, pulleach cable a few timesto make sure thatthe cables move smoothlyover
the pulleys. Ifone of the cables does not move smoothly,find and correctthe problem. IMPORTANT: If the
cables are not properly installed, they may be damaged when heavy weight is used. If there is any
slack in the cables, you will need to remove the slack by tightening the cables. See TROUBLE-
SHOOTING AND MAINTENANCE on page 26.
22