Filter
Top Products
50. Wrap the Ab Cable (107) under a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Guards (66) to the Right Base (1)
with an MIO x 50mm Bolt (64) and an MIO Nylon
Locknut (90). Make sure the Cable Trap and
Finger Guards are oriented as shown.
51. Wrap the Ab Cable (107) over a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Guards (66) at the second hole
from the bottom of the two Pulley Plates (51) with
an MIO x 50mm Bolt (64) and an MIO Nylon
Locknut (90). Make sure the Cable Trap and
Finger Guards are oriented as shown.
52. Wrap the Ab Cable (107) under a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Covers (66) to the Right Base (1)
with an MIO x 50mm Bolt (64) and an MIO Nylon
Locknut (90). Make sure the Cable Trap and
Finger Guards are oriented as shown.
53. Wrap the Ab Cable (107) over a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Guards (66) to the lower hole in
the indicated "U'-bracket (50) with an MIO x
50mm Bolt (64) and an MIO Nylon Locknut (90).
Make sure the Cable Trap and Finger Guards
are oriented as shown.
54. Wrap the Ab Cable (107) under a 90mm Pulley
(63). Attach the Pulley, a Cable Trap (68) and two
Half Finger Guards (66) to the Right Base (1) with
an MIO x 50mm Bolt (64) and an MIO Nylon
Locknut (90). Make sure the Cable Trap and
Finger Guards are oriented as shown.
50
52
53
54
90 66
50,
66
64,
9O
66-
1
1
107
63 _64
68
19