Filter
Top Products
23. Wrap the Press Cable (109) around a 90mm
Pulley (63). Attach the Pulley, two Half Finger
Guards (66), a Cable Trap (68), and an MIO
Washer (99) to the Left Seat Frame (27) with an
MIO x 103mm Bolt (22) and an MIO Nylon
Locknut (90). Make sure the Cable Trap and the
Finger Guards are oriented as shown.
24. Wrap the Press Cable (109) around a "V'-pulley
(62). Attach the "V'-pulley, two Half Finger Guards
(66), and two MIO Washers (99) to the Leg Press
Frame (28) with an MIO x 115mm Bolt (71) and
an MIO Nylon Locknut (90). Make sure the
Finger Guards are oriented as shown.
25. Wrap the Press Cable (109) around a 90mm
Pulley (63). Attach the Pulley, two Half Finger
Guards (66), a Cable Trap (68), and an MIO
Washer (99) to the Left Upright (26) with an MIO
x 108mm Bolt (72) and an MIO Nylon Locknut
(90). Make sure the Cable Trap and Finger
Guards are oriented as shown.
26. Wrap the Press Cable (109) around a 90mm
Pulley (63). Attach the Pulley, two Half Finger
Guards (66), a Cable Trap (68), and an MIO
Washer (99) to the Press Frame (29) with an MIO
x 135mm Bolt (70). Make sure the Cable Trap
and Finger Guards are oriented as shown.
22
26
90
99
68
71
90
J 109
66
90
66
109
99
70
63
68
13