Filter
Top Products
57. Attachthe Seat (16) to the Seat Frame (8) with two
114"x 3/4" Screws (114), a 1/4"x 2 1/2" Screw (99),
and a 1/4" Washer (97).
58. Attach the ButterflyBackrest (15) to the Butterfly
Updght(3) with four 1/4" x 3/4" Screws (114).
59. Wet one end ofthe Squat Arm (32) with soapy
water. Slide a Short Pad (20) ontothe Squat Arm
as shown.
Slidetwo Nut Clips (108) onto a Squat Handle (33).
Attachthe Squat Handle to the Squat Arm (32) with
two 5/16" x 3/4" Button Head Screws (51). Slide an
Inner Cap w/Hole (111) ontothe Squat Handle and
press it ontothe end ofthe SquatArm. Wet the
Squat Handle with soapy water. Slidean 8"
Handgrip(84) onto the Squat Handle.
Repeat this step with the other end of the Squat
Arm (32).
60. Attach the Squat Arm (32) tothe Squat Bracket (37)
with two 3/8" x 2 1/2" Carriage Bolts(106), two 3/8"
Washers (91), and two 3/8" Nylon Locknuts(87).
Do not tighten the Nylon Locknuts yet.
Finishattachingthe Squat Arm (32) to the Squat
Bracket (37) with a 3/8" x 3"Bolt (107), a 3/8"
Washer (91), and a 3/8" Nylon Locknut(87).
Tighten all of the 3/8" Nylon Locknuts (87) used
In this step.
57
58
114
59
,114
60
2O
51
111
84
107
87 ,_=e_91 32
87 37
2O